CAECILIA LED Pendelleuchte | Schwarz | Dimmbar

Yes, please take a look at our downloads. You'll find the document there.

Switch off the light by unplugging the power supply unit. Press and hold the On button on the remote control while plugging the power supply unit back into the socket. The remote control is now connected

On the ceiling suspension and on the wire holders, each suspension wire is guided through a small split pin. Push the split pin in with one finger while you pull the suspension wire with the other hand or guide the wire back into the housing to change the hanging height of the lamp. Thanks to this mechanism, you can change the hanging height even after the lamp has been mounted.

Sometimes the ropes just need a little more time and weight to unhook. Try changing the weight shift a little if necessary. Otherwise you can pull the ropes straight with warmed hands. This will solve the problem.

Yes, the light comes with built-in LEDs and is ready for immediate use. You don't need to buy any extra bulbs but can install and use the lamp straight away. The LEDs have a very long service life of 50,000+ hours and are covered by our 3-year guarantee.

Yes, the light can be switched on and off using both the light switch and the remote control.

Our lights are not smart home-compatible as standard. However, you can connect them to a smart home system. To do this, you need to replace the installed transformer with a suitable Smart Home transformer. Make sure that the new transformer meets the technical requirements of the previous transformer. Our lights are controlled via constant current. The Smart Home system must therefore be designed for constant current luminaires. Constant voltage systems are not compatible with our lights. If you want to continue to adjust the color temperature (warm to cool white), the Smart Home transformer must be CCT-capable.

Our lights are not TRIAC dimmable as standard. However, you can make them TRIAC dimmable. To do this, you need to replace the installed transformer with a suitable TRIAC transformer. Make sure that the new transformer meets the technical requirements of the previous transformer. Our lights are controlled via constant current. The TRIAC transformer must therefore be designed for constant current luminaires. Constant voltage systems are not compatible with our luminaires. The transformer must also meet the minimum requirements of the LEDs (wattage and voltage). Please note that you must then decide whether to use only cool white, warm white or neutral white (both LED colors mixed) during installation.

Yes, you can return all our lamps within 14 days and will receive a full refund within a few days. For a stress-free return process, you can register your return in our returns portal and you will always be informed about the status of your return.

Yes, our remote lights have a memory function that can be used to save a setting. To activate it, you must wait at least 20 seconds between switching off and on using the wall switch. When operated with the remote control, the previous setting is always saved.

A card with a QR code is included in your delivery. This will take you to the assembly instructions.

Yes, the ropes and cables of the Caecilia can all be individually adjusted in length.

Our luminaires do not have an additional outlet for a cable duct in the wall or ceiling plate as standard. They are designed to be mounted directly on the existing power connection.

If your power connection is not exactly where you want the luminaire to be, you can always drill a hole in the wall or ceiling panel of the luminaire to run a cable duct and mount the luminaire in an offset position.

Please note, however, that we do not accept any warranty for subsequent drilling. In addition, the luminaire cannot be exchanged after such a modification.